SMTP, the current protocol for sending electronic mail (e-mail) over the Internet, has for many years suffered from several problems and limitations. When it was designed, well over twenty years ago, the requirements for e-mail were very different from those of today. A message was a text message in English, and both user and machine were explicitly named in the address. The protocol was not designed to transfer other types of messages, and no mechanism was included to verify the identity of the sender.In order to solve these shortcomings, a new e-mail protocol needs to be defined. This report specifies a basis for what such a protocol may look like.

This report describes the design and implementation of a multi-master, packet based protocol for small and tiny microcontrollers where resources are limited. The protocol was named "Tiny Controller Network" or TCN for short. The protocol is meant mainly as a control bus for automation and sensor acquisition applications but due to its flexibility can also be used for other purposes as well. It borrows some of its functionality and design ideas from the well known CAN bus and Modbus but also has a number of major differences like the use of standard hardware and time synchronisation. One of the key aspects during the design was the use of very little system resources and common on-chip hardware peripherals like a UART.

This report describes the design and implementation of a multi-master, packet based protocol for small and tiny microcontrollers where resources are limited. The protocol was named "Tiny Controller Network" or TCN for short. The protocol is meant mainly as a control bus for automation and sensor acquisition applications but due to its flexibility can also be used for other purposes as well. It borrows some of its functionality and design ideas from the well known CAN bus and Modbus but also has a number of major differences like the use of standard hardware and time synchronisation. One of the key aspects during the design was the use of very little system resources and common on-chip hardware peripherals like a UART.

The remotely operated underwater vehicles that the client develops have needs of different kinds of data channels. In order to minimize the need of physical cable between the control unit and a ROV, a multiplex protocol has been developed. The protocol has been designed with the aim of using the bandwidth of the transferring link as efficient as possible.The different kinds of data channels used during this thesis project is; RS232, RS485 and CAN. ROM and FIFO-memories have been used to be able to effectively manage the different data channels. All the reading and sending of these channels have been implemented in FPGA-technology, the coding is made generic so that it will be easier to add more channels to the system in the future.The multiplex protocol is a modified version of the method STDM and it is a proprietary protocol.

With the advent of powerful multimedia capable mobile phones, the market for mobile services is flourishing. Zenterio AB's Halfpipe Active Desktop is a complete distributed mobile service platform a with a powerful server and platform-independent client. The communication between the client and server takes place over a GPRS-capable mobile network. The purpose of this thesis is to develop a secure communications protocol for use between the Halfpipe Active Desktop client and server. This is done by determining requirements, analyzing candidate protocols and then by designing the final protocol.

The Internet protocol of today has been used for over 20 years. A new version of the protocol has been developed to replace the old one. This is a direct result due to the explosive growth of the usage of the Internet. This follows by new demands which needs new solutions. This report brings up the old protocol IPv4, the new protocol IPv6 and shows what kind of changes that has been developed to meet the users demand.The report brings up two important aspects; internet security and mobility.

This project investigated the current market regarding wireless net and the communication between the tools used for diagnostics/maintenance and an embedded system. Based on documentation obtained through interviews a demo system was created based on Bluetooth Low Energy (BLE) communication between an embedded system and an Android device.This report intends to describe the tools and methods used in the design of the demo system and the result of an analysis of the BLE communication.Bluetooth Low Energy is an exciting protocol with wide applicability within the industrial field. This project investigated the communicational possibilities between a Smartphone and a Raspberry Pi and based on the results that emerged the conclusion can be drawn that BLE is a protocol with many beneficial applications within industrial IT..

This project investigated the current market regarding wireless net and the communication between the tools used for diagnostics/maintenance and an embedded system. Based on documentation obtained through interviews a demo system was created based on Bluetooth Low Energy (BLE) communication between an embedded system and an Android device.This report intends to describe the tools and methods used in the design of the demo system and the result of an analysis of the BLE communication.Bluetooth Low Energy is an exciting protocol with wide applicability within the industrial field. This project investigated the communicational possibilities between a Smartphone and a Raspberry Pi and based on the results that emerged the conclusion can be drawn that BLE is a protocol with many beneficial applications within industrial IT..

This project investigated the current market regarding wireless net and the communication between the tools used for diagnostics/maintenance and an embedded system. Based on documentation obtained through interviews a demo system was created based on Bluetooth Low Energy (BLE) communication between an embedded system and an Android device.This report intends to describe the tools and methods used in the design of the demo system and the result of an analysis of the BLE communication.Bluetooth Low Energy is an exciting protocol with wide applicability within the industrial field. This project investigated the communicational possibilities between a Smartphone and a Raspberry Pi and based on the results that emerged the conclusion can be drawn that BLE is a protocol with many beneficial applications within industrial IT..

This report describes a bachelor thesis work performed at the cloud storage company CloudMe in Linköping, Sweden. The storage service provided by CloudMe allows users to access their files seamlessly from multiple units at the same time. In the cloud there is storage provided for contacts, calendar and e-mail, which is data nowadays normally used by smart phones.Exchange ActiveSync is a protocol developed by Microsoft which, among much more, provides functionality to synchronize the previously described data. This protocol is supported by the smart phone developers and the ability to synchronize over the exchange protocol is implemented in products by default. Due to this fact it would be preferable to implement support for synchronization from CloudMe to phones over this protocol.

The final thesis named Tracking in Sensor Networks was created by the company Instrument control Sweden. The thesis work is to create a plug-in to an already developed software pro- gram, SkyView. Via the software program one should be able to control an IP-camera from AXIS, model 215 PTZ, with the appropriate protocol over a network.  An Application Programming Interface, API, was used to easily control the camera through SkyView. The interface is called VAPIX and is used to all cameras from AXIS.

Transdiagnostisk KBT-behandling har under senare år blivit ett allt vanligare forskningsområde. Företrädare för transdiagnostiska behandlingar har argumenterat för att gemensam psykopatologisk grund och gemensamma verksamma behandlingsmekanismer vid emotionella tillstånd gör att patienter med olika diagnoser och med komorbida tillstånd kan ha hjälp av samma behandling och att transdiagnostiska behandlingar kan öka tillgången till evidensbaserad behandling. Unified Protocol är en transdiagnostisk behandling vid emotionella tillstånd. Syftet med denna studie var undersöka effekten av Unified Protocol som gruppbehandling i reguljär psykiatrisk vård. Behandling genomfördes med sammanlagt 23 deltagare.

Zero knowledge protocols is a lesser known type of protocol that can be used for identification. These protocols are especially designed not to reveal any information during an identification process that can be misused later on, neither by the one who should be convinced of the identity of the user, nor by anyone else that is eavesdropping. Many of these protocols are also especially designed for implementation in smart cards. The more common type of card with a magnetic stripe has during the last few years become more susceptible to attacks since they are easily copied. Smart cards combined with a secure identification protocol has been predicted to be the solution to this problem.

This project investigated the current market regarding wireless net and the communication between the tools used for diagnostics/maintenance and an embedded system. Based on documentation obtained through interviews a demo system was created based on Bluetooth Low Energy (BLE) communication between an embedded system and an Android device.This report intends to describe the tools and methods used in the design of the demo system and the result of an analysis of the BLE communication.Bluetooth Low Energy is an exciting protocol with wide applicability within the industrial field. This project investigated the communicational possibilities between a Smartphone and a Raspberry Pi and based on the results that emerged the conclusion can be drawn that BLE is a protocol with many beneficial applications within industrial IT..

The original promise behind the Internet Protocol was to deliver data from a sender to the receiver using a best-effort approach. This means that the protocol makes no guarantees except that it will try to deliver the data to the destination. If some problem occurs the packet may be discarded by the network without any notice. No guarantees are made regarding the time it takes to deliver the data, the rate at which data will be delivered or if data is delivered in the same order it was sent. The best-effort approach is arguably the reason behind the success of the Internet Protocol and is what makes IP scalable to networks the size of the Internet.